[NEW] Steam/Game-specific troubleshooting | wiki dota – Vietnamnhanvan

wiki dota: คุณกำลังดูกระทู้

NỘI DUNG BÀI VIẾT

Introduction

See Steam/Troubleshooting first.

This page assumes familiarity with the Steam#Directory structure, Steam#Launch options, environment variables, the Steam runtime and shared libraries. The pseudo-variable is used to refer to a game’s directory. When the text reads “” it is implied that you either update your launch options or run the game from the command-line with the environment variable.

Contributing

  • Use “game directory” or the pseudo-variable to refer to a game’s directory.
  • Link bug reports and sources of workarounds.

Other sources

The following links offer even more fixes and tweaks for various games which would otherwise exceed this article’s purpose:

For games running with Proton, you can check the ProtonDB which lists a lot of useful user reports for specific games. You can filter searched reports by Linux distribution and by hardware. Users also describe if they had to apply tweaks.

Common steps

OpenSSL 1.0 setup

Some Steam games are built against OpenSSL 1.0. (FS#53618)

Install and run the game with LD_LIBRARY_PATH=/usr/lib/openssl-1.0.

Adobe Air setup

The package AUR[broken link: package not found] installs Adobe Air not in the place where the game expects it to be, fix this by creating the following symlink:

# ln -s "/opt/adobe-air-sdk/runtimes/air/linux/Adobe AIR" "/opt/Adobe AIR"

Adobe AIR requires you to accept its EULA by creating the file ~/.appdata/Adobe/AIR/eulaAccepted containing 2.

Currently Steam Link does not work with Wayland. You will only see a blank screen or even flickering when connecting to a Steam host running on Wayland. So you have to disable Wayland in /etc/gdm/custom.conf:

WaylandEnable=false

And reboot before trying again.

Squares or invisible symbols, special characters and cyrillic letters in Source-based games

Any special character may produce a square or an empty space mark in the game, main menu and game console. In practice, any characters other than latin ones are not working. The problem is that Bitstream Vera Sans is configured as the system primary default font for latin sans-serif fonts.

First, make sure that per-user font customization files are enabled, i.e. the following file exist:

/etc/fonts/conf.d/50-user.conf

Next, create fonts.conf file in your fontconfig directory with the following content or if the file already exist, append only the alias section to the file:

~/.config/fontconfig/fonts.conf
<?xml version="1.0"?>
<!DOCTYPE fontconfig SYSTEM "fonts.dtd">
<fontconfig>
 <alias>
  <family>sans-serif</family>
   <prefer>
    <family>DejaVu Sans</family>
    <family>Verdana</family>
    <family>Arial</family>
    <family>Albany AMT</family>
    <family>Luxi Sans</family>
    <family>Nimbus Sans L</family>
    <family>Nimbus Sans</family>
    <family>Helvetica</family>
    <family>Lucida Sans Unicode</family>
    <family>BPG Glaho International</family> 
    <family>Tahoma</family> 
   </prefer>
 </alias>
</fontconfig>

Games

7 Days To Die

If the game crashes on start, add the following to Steam launch options:

LD_PRELOAD="libpthread.so.0 libGL.so.1" __GL_THREADED_OPTIMIZATIONS=1 %command% -force-glcore

If the game does not recognize your screen’s resolution, launch the game with Game Launcher and check the Unity screen selector option to correct the resolution. This will give you a GUI in which you can select the correct screen when the game is started.

Note: The game tends to crash or disfunction in windowed mode. It may be advisable to run it in full screen mode.

If that does not help try running the game in 32-bit mode by checking the respective option in the Game-engine in the launcher options.

It will help the game performance if the GLCore option is checked in launcher options.

Note: The game does not accept .dll mods if installing mods. Always check if the mod is of .dll type

Alien Isolation

Missing libpcre.so.3 and libidn.so.11

$ ln -s /usr/lib/libpcre.so '/lib/x86_64/libpcre.so.3'
$ ln -s /usr/lib/libidn.so '/lib/x86_64/libidn.so.11'

Append ./lib/x86_64 to your LD_LIBRARY_PATH.[1]

Amnesia: The Dark Descent

Dependencies:
[2]

  • AUR

Gamepad not working

The version of libSDL2 shipped with the game seems to be out-of-date and may not support your gamepad yet. Simply remove or rename <install_dir>/game/lib64/libSDL2-2.0.so.0, the linker will fall back to using the up-to-date version from /usr/lib.

And Yet It Moves

Dependencies:

Game does not start

When the game refuses to launch and prints one of the following error messages:

readlink: extra operand ‘Yet’
Try 'readlink --help' for more information.
This script must be run as a user with write priviledges to game directory

Open /AndYetItMovesSteam.sh and surround ${BASH_SOURCE[0]} in the following line with double quotes.

ayim_dir="$(dirname "$(readlink -f ${BASH_SOURCE[0]})")"

Anodyne

Dependencies:

  • AUR[broken link: package not found], follow #Adobe Air setup
  • (probably not required)

Play with a controller: joy2key configuration

Configuration example to play Anodyne with an XBox 360 Wireless Controller

COMMON
-dev /dev/input/js0
-X
-thresh -18000 18000 -18000 18000 -18000 18000 -18000 18000 -18000 18000 -18000 18000 -18000 18000 -18000 18000
-axis Left Right Up Down blank blank blank blank blank blank blank blank Left Right Up Down
-buttons c x Return

Save this to ~/.joy2keyrc and start joy2key after you start Anodyne

joy2key -rcfile ~/.joy2keyrc

Anomaly Warzone Earth

Leave fullsrceen

There are no ingame settings for this, but fullscreen can be toggled with Alt-Enter

Infinite loading

Create file loadfix.c next to the game executable: src

#define _GNU_SOURCE 
#include <dlfcn.h> 
#include <semaphore.h> 
#include <stdio.h> 
#include <time.h> 
#include <unistd.h> 
static int (*_realSemTimedWait)(sem_t *, const struct timespec *) = NULL; 

int sem_timedwait(sem_t *sem, const struct timespec *abs_timeout)
{ 
    if (abs_timeout->tv_nsec >= 1000000000)
    { 
        //fprintf(stderr, "to: %lu:%lu\n", abs_timeout->tv_sec, abs_timeout->tv_nsec); 
        ((struct timespec *)abs_timeout)->tv_nsec -= 1000000000; 
        ((struct timespec *)abs_timeout)->tv_sec++; 
    } 
    return _realSemTimedWait(sem, abs_timeout); 
} 

__attribute__((constructor)) void init(void) 
{
    _realSemTimedWait = dlsym(RTLD_NEXT, "sem_timedwait");
}

Compile with gcc -m32 -o loadfix.so loadfix.c -ldl -shared -fPIC -Wall -Wextra

Launch with LD_PRELOAD=$LD_PRELOAD:./loadfix.so %command%

Gamepad not working

You have to enable keyboard control and map gamepad to keys.

Config for Steam: steam://controllerconfig/91200/1498735506

Aquaria

Mouse pointer gets stuck in one direction

If the mouse pointer gets stuck in one direction, make sure /usersettings.xml contains <JoystickEnabled on="0" />.

If that does not fix the issue, try unplugging any joysticks or joystick adapter devices you have plugged in.

ARK: Survival Evolved

Game does not start, displays text window with unreadable text

Run the game with MESA_GL_VERSION_OVERRIDE=4.0 MESA_GLSL_VERSION_OVERRIDE=400.

Gray water

Download the TheCenter map and copy Water_DepthBlur_MIC.uasset from that map into TheIsland as described here.

Ragnarok uses TheIsland’s texture, so the same procedure fixes the issue on Ragnarok as well.

Segmentation fault on startup

Caused by the games packaged libopenal. Use system libopenal to solve the segfault by running the game with with LD_PRELOAD=/usr/lib/libopenal.so.1

Crash on joining a game

Set steam to ‘offline mode’ and try again

Audiosurf 2

error. unable to load song <filename> ,came back with zero duration

If you get this in your log, install .

BADLAND: Game of the Year Edition

Refer to #Missing libcurl.so.4 or version CURL_OPENSSL_3 not found.

BATTLETECH

Game does not start

Try deleting /BattleTech_Data/plugins/x86_64/libc.so.6, this should make the game run again.

Beat Cop

“BeatCop.x86_64” is not responding

Run BeatCop.x86 instead of BeatCop.x86_64.

Binding of Isaac: Rebirth

No sound

Note: This also helps with Never Alone (Kisima Ingitchuna) and No Time to Explain.

Prepend /usr/lib to LD_LIBRARY_PATH.

Adjust the audio levels in the game options.

BioShock Infinite

Game launching on wrong monitor in fullscreen mode

Add the following launch option:

--eon_force_display=1

Various more fixes and tweaks can be found here

BLACKHOLE

Refer to #Missing libcurl.so.4 or version CURL_OPENSSL_3 not found.

Black Mesa

Install AUR for 32bit version of libtcmalloc_minimal.so.4 which is needed Source.

Block’hood

White screen on startup

When launched the game may only display a white screen with no interface and no way to play the game. Add “-screen-fullscreen 0” to launch options.

The Book of Unwritten Tales

Dependencies:

  • AUR
  • AUR

If the game does not start, uncheck: .

The game is known to segfault when opening the settings and possibly during or before playing. A workaround from the Steam discussions is to replace the game’s RenderSystem_GL.so with one from Debian’s repositories. To do that download this deb file, and extract it with :

$ dpkg -x libogre-*.deb outdir

Now replace /lib/32/RenderSystem_GL.so with the one extracted from the .deb package.

BRAIN/OUT

If the game does not start with error message saying “invalid app configuration”.
Change directory to game folder:

$ cd ~/.steam/steam/steamapps/common/BrainOut/

Run game directly:

$ java -jar brainout-steam.jar

You need to have steam running in the background.

The Book of Unwritten Tales: The Critter Chronicles

See #The Book of Unwritten Tales.

To prevent the game from crashing at the end credits, change the size of the credits image as described here.

Borderlands 2

Migrating saves from other platforms

Borderlands 2 does not support cross-platform Steam Cloud syncing,
you have to manually copy the files between platforms.
Save locations can be found here.
Make sure your user can access the files.

Using Ctrl Key

Borderlands 2 does not allow the Ctrl key to be used by default. The game seems to be accessing keycodes and not keysyms, therefore xmodmap has no affect. A workaround is using to map the Ctrl-scancode to some other key, as described in Map scancodes to keycodes#Using setkeycodes. I use setkeycodes 0x1d 56 (as root) to map Ctrl to Alt before starting the game and setkeycodes 0x1d 29 to restore the default.

Logging into SHiFT

Out of the box you will not be able to log into SHiFT since the game expects certificates to be in /usr/lib/ssl, which is where Ubuntu stores them. Arch however uses /etc/ssl.
To resolve the problem, run the game with SSL_CERT_DIR=/etc/ssl/certs.

Game crashes nearly instantly

The game crashes in libopenal directly after launch.

Possible solution 0: Run the game with the -nostartupmovies flag. It no longer crashes in libopenal with a general protection error.

Possible solution 1: As of lib32-openal version 1.18.0-1, the game crashes instantly. The possible solutions are to downgrade lib32-openal to 1.17.2-1, or to start the game with LD_PRELOAD='$HOME/.steam/root/ubuntu12_32/steam-runtime/i386/usr/lib/i386-linux-gnu/libopenal.so.1'.

In case there are messages like this in the terminal:

[  671.617205] Borderlands2[2772]: segfault at 0 ip           (null) sp 00000000ff9a462c error 14 in Borderlands2[8048000+235a000]

The following change may help (source):

LD_PRELOAD='./libcxxrt.so:/usr/$LIB/libstdc++.so.6' %command%

Possible solution 2: Launch steam as steam-native as described in #Steam native runtime. If the game still fails to launch even after installing the meta package, then you might be missing some libraries. You can find those missing libraries as described in #Debugging shared libraries.

Borderlands: The Pre-Sequel

See #Borderlands 2.

Keyboard not working

This can occur with certain window managers e.g. dwm. Try a different window manager, or install and run:

$ wmname LG3D

see Java#Impersonate another window manager for more information.

Not starting via Steam

If the game appears as , then syncs and closes when you launch it from Steam, try creating a steam_appid.txt in the game directory
containing 261640. This should resolve the issue and let you start the game directly from the game directory. If that does not work, try using the .

Chaos Engine

Set your launch options to:

LD_PRELOAD="/usr/lib32/libpng16.so.16" %command%

If such error is seen in terminal output of steam-native:

/home/$USER/.local/share/Steam/steamapps/common/Chaos engine/TheChaosEngineSteam: /home/$USER/.local/share/Steam/steamapps/common/Chaos engine/lib/libz.so.1: version `ZLIB_1.2.9' not found (required by /usr/lib32/libpng16.so.16)
/home/$USER/.local/share/Steam/steamapps/common/Chaos engine/TheChaosEngineSteam: /home/$USER/.local/share/Steam/steamapps/common/Chaos engine/lib/libz.so.1: version `ZLIB_1.2.3.4' not found (required by /usr/lib32/libpng16.so.16)

Then link the system libz.so:

cd ~/.local/share/Steam/steamapps/common/Chaos\ engine/lib
mv libz.so.1 libz.so.1.old
ln -s /lib/libz.so.1

Cities in Motion 2

Dialog boxes fail to display properly

You will not be able to read or see anything, and you will have this in your logs:

Fontconfig error: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 69: non-double matrix element
Fontconfig error: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 69: wrong number of matrix elements

Workaround for the bug FS#35039 is available here (replace /etc/fonts/conf.d/10-scale-bitmap-fonts.conf).

Cities Skylines

Game not starting

If you set $XDG_DATA_HOME to something other than $HOME/.local/share, Cities Skylines will put some files in $XDG_DATA_HOME/Paradox Interactive and some hard-coded in ~/.local/share/Paradox Interactive.
Unset the Variable to fix this issue.

Textures not rendering properly

Run the game with UNITY_DISABLE_GRAPHICS_DRIVER_WORKAROUNDS=yes.

Game crashes in loading screen when Node Controller or Intersection Marking tool are enabled in Content Manager

If the game crashes with one or both of the above mods enabled when loading a save or starting a new game but works fine with both mods disabled, install .

Civilization V

Run the game with LD_PRELOAD=/usr/lib32/libopenal.so.1 %command%.[3] For old versions of PulseAudio (<12.0), use LD_PRELOAD='./libcxxrt.so:/usr/$LIB/libstdc++.so.6:/usr/lib32/libopenal.so.1' %command%.[4] If libopenal.so.1 is not in /usr/lib32, you may need to install after making sure multilib is enabled.Official repositories#multilib

If you are experiencing heavy lag (less than 1fps) or the game crashes on startup, try adding the following paths to LD_PRELOAD: '/usr/$LIB/libgcc_s.so.1 /usr/$LIB/libxcb.so.1 /usr/$LIB/libgpg-error.so ./libcxxrt.so /usr/lib32/libstdc++.so.6 /usr/lib32/libopenal.so.1'.[5][dead link 2021-05-17 ⓘ]

Stuttering sound with PulseAudio

See PulseAudio/Troubleshooting#Laggy sound.

Game crashes seconds after loading a map

If you have a CPU with more than 8 threads (such as AMD Ryzen), set MaxSimultaneousThreads to 16 in config.ini in game directory.[6]

Alternatively, you can limit the number of threads the game uses by adding taskset -c 0-7 %command% to the launch options: [7]

Game crashes after intro video with “Unable to load texture (LoadingBaseGame.dds)” / configuration reset at startup

The issue is a result of the game calling some file in a case-insensitive manner.

The solution is either to install the game on a case-insensitive file system like VFAT, or on a mount point for AUR.

It is not enough the game is in a case-insensitive filesystem, but also the configuration/data directory at “~/.local/share/Aspyr/Sid Meier’s Civilization 5” needs to be in a case-insensitive filesystem or mount point. If the data directory is in a case-sensitive filesystem, the game will not work correctly and symptoms such as configuration getting constantly reset can be observed.

Game crashes on startup with an error in libpulsecommon-12.0.so”

Run the game with LD_PRELOAD=/usr/lib32/libopenal.so.1 %command%

Steam Overlay not working

If the Steam Overlay does not show up simply add

LD_PRELOAD='/home/USERNAME/.local/share/Steam/ubuntu12_32/gameoverlayrenderer.so' %command%

to the launch options in the properties of the game in Steam.

Crashes during __memcpy_ssse3

This appears to be a memory alignment bug that can be corrected by compiling the libraries with -mstackrealign. GDB can also be used to run it as-is with the following launch options:
LD_PRELOAD=/usr/lib/libcurl.so.4 /bin/gdb -windows -batch -return-child-result -nx -eval-command=”run” -exec=%command%

Civilization: Beyond earth

If you are getting an instant crash/close upon launch, make sure you have the following packages installed:

  • AUR

Segfault after a few minutes

Backtrace:

   #0  0x08b71d06 in FireGrafix::DynamicsLock<Graphics::BuildingSkinnedDataDynamicConsts>::DynamicsLock(Graphics::SurfaceSet**, FireGrafix::SurfaceSetPoolAllocator*, unsigned short) ()
   #1  0x08c25ffc in cvLandmarkVisSystem::cvLandmarkVisDynamicConstantUpdaterSS::HandleBuildingShaderSkinned(Graphics::FGXShaderPackageInstanceView*, FireGrafix::FGXModelNode*, FGXVector4*) ()
   #2  0x08c25f34 in cvLandmarkVisSystem::cvLandmarkVisDynamicConstantUpdaterSS::UpdateNode(Graphics::FGXShaderPackageInstanceView*, FireGrafix::FGXModelNode*, FGXVector4*) ()
   #3  0x08c25e2c in FireGrafix::FGXModelRenderByNodeSSExample_Shadow<cvLandmarkVisSystem::cvLandmarkVisDynamicConstantUpdaterSS, 2, FireGrafix::FGXModelRenderEndSuperclass>::RenderNode(unsigned int*, FireGrafix::FGX_SPIV_GENERIC*, FireGrafix::FGXModelNode*, FGXVector4*) ()
   #4  0x08c24ff5 in cvLandmarkVisSystem::LandmarkRenderJob::Execute(unsigned int) ()
   #5  0x093d26d9 in Platform::JobTask::execute() ()
   #6  0xf749f3c0 in ?? () from /usr/lib32/libtbb.so.2
   #7  0xf7497551 in ?? () from /usr/lib32/libtbb.so.2
   #8  0xf7495fc3 in ?? () from /usr/lib32/libtbb.so.2
   #9  0xf7491b7e in ?? () from /usr/lib32/libtbb.so.2
   #10 0xf7491db7 in ?? () from /usr/lib32/libtbb.so.2
   #11 0xf78f4346 in start_thread () from /usr/lib32/libpthread.so.0
   #12 0xf7716026 in clone () from /usr/lib32/libc.so.6

Segfault is caused by AUR. To fix the issue:

  1. Download the libtbb2 deb-package from the Ubuntu archive.
  2. Unpack libtbb.so.2 from libtbb2_4.2_20130725-1.1ubuntu1_i386.deb/data.tar.xz/usr/lib into the game directory.
  3. Run the game with LD_PRELOAD='./libtbb.so.2'.

Civilization VI

Either run with steam-native, launch option LD_PRELOAD=/usr/lib/libfreetype.so.6 %command%, env LD_PRELOAD='./libcxxrt.so:/usr/$LIB/libstdc++.so.6' or go to , check “Force the use of a specific Stam Play compatiblity tool” and select “Steam Linux runtime”.

If you are using Wayland, you might need to also set QT_QPA_PLATFORM=xcb, as the game’s launcher uses a version of Qt which only supports Xorg (see Wayland#Qt). Some versions of the game also seem to require adding SDL_VIDEODRIVER=x11 and will otherwise refuse to start with an error message that reads “An unrecoverable error has occurred, and Civilization VI cannot continue.”

Follow #OpenSSL 1.0 setup.

Ensure that Steam Workshop mods are disabled as certain ones may cause issues following loading.

Steam Overlay not working

Since the introduction of the new launcher, the steam overlay does not work in this game. To get it working again, simlpy skip the launcher as described in #Launcher unable to load page.

If Segfault Immediately on Start

This is a strange corner case which happens infrequently at best (and the prerequisites for reproducing it are unknown), but the crash would look like this:

  1. Immediate segfault on start, before any windows get created
  2. The game creates ~/.local/share/aspyr-media/Sid Meier's Civilization VI/AppOptions.txt
  3. The string AppHost::BugSubmissionPackager::BugSubmissionPackager appears in the backtrace output when running the game under
    1. To run under , first launch a shell and change into the game directory.
    2. Then echo 289070 > steam_appid.txt
    3. Then run something like gdb -ex run -ex bt -ex quit --args ./Civ6 ./Civ6
    4. The relevant info towards the end of the output should look like this:
   Thread 3 "Civ6" received signal SIGSEGV, Segmentation fault.
   [Switching to Thread 0x7fffe5d06700 (LWP 12315)]
   0x000000000201121e in AppHost::BugSubmissionPackager::BugSubmissionPackager(unsigned long, String::BasicT<Platform::StaticHeapAllocator<5, 0>, (String::Encoding)4> const&, String::BasicT<Platform::StaticHeapAllocator<5, 0>, (String::Encoding)0> const&, AppHost::ModuleVersionInfo const&) ()
   #0  0x000000000201121e in AppHost::BugSubmissionPackager::BugSubmissionPackager(unsigned long, String::BasicT<Platform::StaticHeapAllocator<5, 0>, (String::Encoding)4> const&, String::BasicT<Platform::StaticHeapAllocator<5, 0>, (String::Encoding)0> const&, AppHost::ModuleVersionInfo const&) ()
   #1  0x000000000200c796 in AppHost::_INTERNAL::SetupFXSPlatform(AppHost::AppEnvironment const*, AppHost::AppOptions*)
       ()
   #2  0x000000000200fea0 in AppHost::RunApp(int, char**, AppHost::Application*) ()
   #3  0x000000000200f9bc in AppHost::RunApp(char*, AppHost::Application*) ()
   #4  0x0000000001112d98 in WinMain ()
   #5  0x00000000010bdab0 in ?? ()
   #6  0x00000000010bfb31 in ThreadHANDLE::ThreadProc(void*) ()
   #7  0x00007ffff473e08a in start_thread () from /usr/lib/libpthread.so.0
   #8  0x00007ffff38f747f in clone () from /usr/lib/libc.so.6

If all of that is the case for you, the fix is pretty simple. Edit ~/.local/share/aspyr-media/Sid Meier's Civilization VI/AppOptions.txt and change the line reading EnableBugCollection 1 to EnableBugCollection 0.

Presumably this fix will prevent any automated bug reports from reaching Aspyr, should you encounter crashes/bugs in the future, but it will at least let the game launch properly.

If Crash with Error “undefined symbol FT_Done_MM_Var”

If the game crashed with error

   ./GameGuide/Civ6: symbol lookup error: /usr/lib/libfontconfig.so.1: undefined symbol: FT_Done_MM_Var

The solution is to set launch option to be

   LD_PRELOAD=/usr/lib/libfreetype.so.6 %command%

If the game ends up being a grey-color blank screen

The solution is to disable mods.

If the computer becomes irresponsive after “Loading” screen

This may be caused by amdgpu driver crash due to insuffcient video memory. If running an integrated graphics (eg. AMD Renoir), try allocating more memory in your BIOS.

Multi-monitor and wayland: mismatched resolution

Wayland does not define a primary monitor, so the game will show the available resolutions of an arbitrary monitor; it may not have the same size and the mouse may be off. A solution is to set an XWayland monitor as primary.

To find the list of XWayland monitors: xrandr --listmonitors

To set (eg) the XWAYLAND4 monitor as the primary: xrandr --output XWAYLAND4 --primary

Launcher window is huge (wrong scaling)

If the launcher window is huge (sometimes bigger than the screen), then the scaling is wrong. Add QT_AUTO_SCREEN_SCALE_FACTOR=0 to the launch options and on next start the launcher should be usable.

Launcher unable to load page

The launcher often shows errors like Error loading page. It is possible to bypass the launcher by editing the games startup configuration ~/.local/share/Steam/steamapps/common/Sid Meier's Civilization VI/Civ6 and changing the line ./GameGuide/Civ6 to ./Civ6Sub.

CrossCode

If FontConfig Errors on Start

                                        ...
 Fontconfig error: "/etc/fonts/fonts.conf", line 6: invalid attribute 'translate'
 Fontconfig error: "/etc/fonts/fonts.conf", line 6: invalid attribute 'selector'
 Fontconfig error: "/etc/fonts/fonts.conf", line 7: invalid attribute 'xmlns:its'
 Fontconfig error: "/etc/fonts/fonts.conf", line 7: invalid attribute 'version'
 Fontconfig warning: "/etc/fonts/fonts.conf", line 9: unknown element "description"
 Fontconfig warning: "/etc/fonts/conf.d/10-hinting-slight.conf", line 4: unknown element "its:rules"
 Fontconfig warning: "/etc/fonts/conf.d/10-hinting-slight.conf", line 5: unknown element "its:translateRule"
 Fontconfig error: "/etc/fonts/conf.d/10-hinting-slight.conf", line 5: invalid attribute 'translate'
 Fontconfig error: "/etc/fonts/conf.d/10-hinting-slight.conf", line 5: invalid attribute 'selector'
 Fontconfig error: "/etc/fonts/conf.d/10-hinting-slight.conf", line 6: invalid attribute 'xmlns:its'
 Fontconfig error: "/etc/fonts/conf.d/10-hinting-slight.conf", line 6: invalid attribute 'version'
 Fontconfig warning: "/etc/fonts/conf.d/10-hinting-slight.conf", line 8: unknown element "description"
 Fontconfig warning: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 4: unknown element "its:rules"
 Fontconfig warning: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 5: unknown element "its:translateRule"
                                        ...

Download the latest version of nwjs from here and extract its contents into your CrossCode directory, overwriting the files.

Be sure to rename nw to CrossCode after.

This solution was documented to work with CrossCode 1.2 and nwjs 0.41.2 and is based on this steam post

Deus Ex: Mankind Divided

Follow #OpenSSL 1.0 setup.

Requires & .

Also if you use Bumblebee set your launch options to:

LD_PRELOAD="$LD_PRELOAD:libpthread.so.0:libGL.so.1" __GL_THREADED_OPTIMIZATIONS=1  optirun %command%

The Clockwork Man

Requires (pulled in by ).

Company of Heroes 2

Make sure you have AUR installed.

Missing libpcre.so.3 and libidn.so.11

Like with #Alien Isolation you need to symlink /usr/lib/libpcre.so to /lib//libpcre.so.3, as well as /usr/lib/libidn.so to /lib//libidn.so.11, otherwise the game will fail to start.

Cossacks 3

No sound

Use the steam-runtime, e.g. set the launch options to:

~/.steam/root/ubuntu12_32/steam-runtime/run.sh %command%

Flashing screen with primus

Set PRIMUS_SYNC=2in the launch options.

Counter-Strike: Source (CS:S)

Invisible symbols, special characters and cyrillic letters

Check #Squares or invisible symbols, special characters and cyrillic letters in Source-based games

Counter-Strike: Global Offensive (CS:GO)

Game starts on the wrong screen

csgo-osx-linux issue #60

If it happens, go into fullscreen windowed or windowed mode and drag the window to the correct monitor. Then go back into fullscreen, the game should now be on the correct monitor.

Cannot reach bottom of the screen on menus

csgo-osx-linux issue #594

If you have a secondary monitor you might have a part of your lower screen you cannot reach in menus.
If on Gnome you can try to open the overview (Super key) and drag the game to the other monitor and back.

If you are not on Gnome or dragging the window back and forth did not work you can try to install and run this command, where X and Y is the offset of the window and H and W is the size.

wmctrl -r "Counter-Strike: Global Offensive - OpenGL" -e 0,X,Y,H,W

Example: SecondaryMonitor: on the left 2560×1600, GamingMonitor: on the right 2560×1440).

wmctrl -r "Counter-Strike: Global Offensive - OpenGL" -e 0,2560,0,1600,1200

Here X and Y is 0,2560 to move the window to the monitor on the right and H and W 1600,1200 is set to match the in-game resolution.

Sound is played slightly delayed

csgo-osx-linux issue #45

See PulseAudio/Troubleshooting#Laggy sound for a possible solution.

Mouse not working in-game

If your mouse works in the main menu but not in-game, run the game with SDL_VIDEO_X11_DGAMOUSE=0.
[8]

Brightness slider not working

Install and run xrandr to find out the name of your connected display output.

Edit /csgo.sh and add the following lines (adapt ):

# gamma correction
xrandr --output  --gamma 1.6:1.6:1.6 # play with values if required
STATUS=42
while [$STATUS -eq 42]; do
 ...
done
# restore gamma
xrandr --output  --gamma 1:1:1
exit $STATUS

Microphone not working

csgo-osx-linux issue #573

CS:GO uses the default PulseAudio sound device ignoring what is configured in Steam settings.

First find out the source name of your microphone (it should start with alsa_input.):

$ pacmd list-sources

Then set the default device (change the name accordingly):

$ pacmd set-default-source 

Also lower the microphone level to 60% otherwise you will get some nasty background noise and you will be difficult to understand (change the name accordingly):

$ pacmd set-source-volume  0x6000

Mouse is unrensponsive or moves slowly

Set launch options to:

vblank_mode=0 %command%

Works with almost any other game.

Game crashes on startup with game controller plugged in

csgo-osx-linux issue #1757

The solution is to add -nojoy to the launch options.

Some texts are missing or mis-positioned

Generate the en_US.UTF-8 locale will solve the problem.

Creeper World 3: Arc Eternal

Game does not start

Search for Player.log
(might be in ~/.config/unity3d/Knuckle Cracker LLC/Creeper World 3/ )

If it says somewhere in Player.log
“FMOD failed to get number of drivers … An error occured that was not supposed to. Contact support.”
Unity is probably having problem with some pulse audio libraries.

Fix that worked for me:
Remove or rename all instances of libpulse-simple* files.

Places to look for them:
/usr/lib
/usr/lib32
~/.steam/steam/ubuntu12_32/steam-runtime/i386/usr/lib/i386-linux-gnu/
~/.steam/steam/ubuntu12_32/steam-runtime/amd64/usr/lib/x86_64-linux-gnu/

Crusader Kings II

No audio

SDL uses PulseAudio by default, so to use it with ALSA you need to set:

~/.pam_environment
SDL_AUDIODRIVER=alsa

Oddly sized starting window

You can make full screen mode the default by setting fullscreen=yes in ~/.paradoxinteractive/Crusader Kings II/settings.txt.

DLCs not detected

If the DLC tab in the launcher is not selectable, rename the DLC directory in the game directory to dlc.

Game takes ages to start

If you are using a nvidia graphics card, make sure you have enabled the DRM kernel mode setting.

Game does not start at all

If the game stopped launching after Patch 3.3 (when the game became 64-bit only), install .

Crypt of the NecroDancer

Crashes after splash screen

The following error occurs if launching Steam from the terminal.

FMOD ERROR: UpdateFMOD SystemUpdate: This command failed because System::init or System::setDriver was not called.

This error is solved by installing .

The Curious Expedition

Game stuck on loading screen

The Electron shipped with this game is too old for Arch Linux.

Install and run the game with electron resources/app.asar.

Death Road To Canada

No music

Prepend /usr/lib to LD_LIBRARY_PATH.

Dirt

Follow #OpenSSL 1.0 setup.

Dirt Rally

Prepend lib/x86_64 to your LD_LIBRARY_PATH, otherwise the game will fail to start.

Note: The order of the paths is important. $LD_LIBRARY_PATH must be the last entry or it will not work.

Divinity: Original Sin – Enhanced Edition

Game does not start when using Bumblebee optirun or primusrun

Edit /runner.sh to use primusrun:

LD_LIBRARY_PATH="." primusrun ./EoCApp

Game does not work with mesa

It is a known bug and they have no intention of fixing it, see the bug.

Workaround[9] (see step by step guide)

Get the following file:
https://bugs.freedesktop.org/attachment.cgi?id=125302
and rename it to divos-hack.c

Then execute

$ gcc -s -O2 -shared -fPIC -o divos-hack.{so,c} -ldl

Copy the divos-hack.so to the folder.

For GOG version, go to the said game folder and run Divinity with the following command

$ allow_glsl_extension_directive_midshader=true LD_PRELOAD="divos-hack.so" ./runner.sh

For , open a console, change to the divinity directory with

$ cd ~/.steam/steam/steamapps/common/Divinity Original Sin Enhanced Edition

Launch steam and got o the preferences of the game, and open the “Set Launch Options” dialogue. There, put the following

allow_glsl_extension_directive_midshader=true LD_PRELOAD="divos-hack.so:$LD_PRELOAD" %command%

Then just start the game.

Doki Doki Literature Club

Linux version is shipped with the Windows version, but can only be installed with Steam Play.

Native version can be started with this launch option: ./DDLC.sh # %command%

Don’t Starve Together

If you get a crash on start in libX11.so.6.4.0, the problem is likely a bug in SDL1.3. Unfortunately, DST is statically linked and we can’t use LD_PRELOAD to replace libSDL with something newer. The bug has been reported to the developer, but a possible workaround is to patch XGetICValues() to not crash when it is incorrectly given a null parameter.

Dota 2

Dependencies:

  • AUR

Install/Set RADV as default Vulkan application

Valve recommend RADV (Mesa) is used instead of AMDVLK (AMD) see here to install and set default:

Vulkan

Switch between OpenGL and Vulkan (recommended)

Under the game launch options add this flag

OpenGL: -gl

Vulkan -vulkan

In-game font is unreadable

Run the game with MESA_GL_VERSION_OVERRIDE=2.1.

Error with libpangoft2

  1. Install the package.
  2. Remove libpango-1.0.so and libpangoft2-1.0.so in /game/bin/linuxsteamrt64.
  3. If you are using Bumblebee add LD_PRELOAD="libpthread.so.0 libGL.so.1" __GL_THREADED_OPTIMIZATIONS=1 optiru to your launch options.

The game does not start

If you run the game from the terminal and, although no error is shown, try disabling: .

Apparently the game #The Book of Unwritten Tales has the same problem. It also describes a workaround that is untested in Dota 2.

Game runs on the wrong screen

Game does not start with libxcb-dri3 error message

After a recent Mesa update, Dota 2 stopped working. The error message is:

SDL_GL_LoadLibrary(NULL) failed: Failed loading libGL.so.1: /usr/lib32/libxcb-dri3.so.0: undefined symbol: xcb_send_fd

Game has no audio

This might happen because Dota 2 is trying to output through ALSA, which has already been taken over by PulseAudio. Try installing and setting in-game audio output to ‘Default’.

Steam overlay

Steam distributes a copy of libxcb which is incompatible with the latest xorg libxcb. See [10], [11].

Clear or disable shader cache for troubleshooting purposes

To clear shader cache delete delete the 570 (Dota’s app ID) folder under the steam shadercache directory e.g.

/home/gaben/steam/steamapps/shadercache/

To disable shader cache add the following to dota’s launch options:

-vulkan_disable_steam_shader_cache

Chinese tips and player names not shown

The Chinese characters in tips and player names are displayed as block characters.

The problem is caused by the font packages: , and AUR.

Chinese input method problem

Dota2 is compatible with IBus .

Devil Daggers

Refer to #Missing libcurl.so.4 or version CURL_OPENSSL_3 not found.

Drox Operative

If the game fails to start with “Couldn’t find Database/database.dbl!”, manually extract the assets. assets003.zip will overwrite some files from the previous files.

$ cd "~/.steam/root/steamapps/common/Drox Operative/Assets"
$ unzip assets00[123].zip

Dungeon Souls

For AMD cards this game crashes on launch, unless you start it like this:

R600_DEBUG=mono %command%

Dying Light

Game crashes on startup

The game runs with the Steam setting “Force the use of a specific Steam Play compatibility tool” > “Steam Linux Runtime”

Dynamite Jack

Requires .

Sound Issues

When running on 64-bit Arch Linux, there may be “pops and hisses” when running Dynamite Jack. This could be caused by not having STEAM_RUNTIME=0 set. (However, even with STEAM_RUNTIME=0 set, the game may still sometimes start with this issue. Exiting and restarting the game seems to make the problem go away.)

Game does not start

If running steam with the STEAM_RUNTIME=0, Dynamite Jack may have a problem starting. Check the steam error messages for this message:

/home/$USER/.steam/root/steamapps/common/Dynamite Jack/bin/main: error while loading shared libraries: libSDL-1.2.so.0: cannot open shared object file: No such file or directory

Install from multilib and Dynamite Jack should start up.

Empire Total War

Weird unreadable fonts

Open ~/.local/share/feral-interactive/Empire/preferences, then find UsePBOSurfaces and change it from 1 to 0.

Euro Truck Simulator 2

Shows only a black screen

Select safe mode when the game starts up.

Firewatch

If Firewatch starts but does not show anything try running Steam with

`STEAM_RUNTIME_PREFER_HOST_LIBRARIES=0 steam`

This game will not run when installed on an XFS or reiserfs filesystem. Workaround is to install on an ext4 filesystem.

FORCED

Requires .

This game has 32-bit and 64-bit binaries. For some reason, Steam will launch the 32-bit binary even on 64-bit Arch Linux.
When manually launching the 64-bit binary, the game starts, but cannot connect to Steam account, so you cannot play.
So install 32-bits dependencies, and launch the game from Steam.

For the King

For steam-native —

Starts with black page. Requires to be told to use the libSDL2 shipping with Steam

Add to Steam launch options for game.

LD_PRELOAD=~/.local/share/Steam/ubuntu12_32/steam-runtime/amd64/usr/lib/x86_64-linux-gnu/libSDL2-2.0.so.0 %command%

Note however, that this disables the Steam overlay as a side effect.

For steam-runtime —

It works out of the box.

For the full experience, run FTK via steam-runtime instead of steam-native.

FTL: Faster than Light

Compatibility

After installation, FTL may fail to run due to a ‘Text file busy’ error (characterised in Steam by your portrait border going green then blue again). The easiest way to mend this is to just reboot your system. Upon logging back in FTL should run.

The Steam overlay in FTL does not function as it is not a 3D accelerated game. Because of this the desktop notifications will be visible. If playing in fullscreen, therefore, these notifications in some systems may steal focus and revert you back to windowed mode with no way of going back to fullscreen without relaunching. The binaries for FTL on Steam have no DRM and it is possible to run the game Steam running, so in some cases that may be optimum – just ensure that you launch FTL via the launcher script in /data/ rather than the FTL binary in the $arch directory.

Problems with open-source video driver

FTL may fail to run if you are using an opensource driver for your video card. There are two solutions: install a proprietary video driver or delete (rename if you are unsure) the library “libstdc++.so.6” inside /data/amd64/lib. This is if you are using a 64bit system. In case you are using a 32bit system you have to remove (rename) the same library located into /data/x86/lib.

Artifacts when launching, Problems with openGL

Using the open source drivers, ATI for radeon cards, the game can display artifacts on screen. Run the game with MESA_GL_VERSION_OVERRIDE=3.0 %command%

Game Dev Tycoon

Game does not start

You might get an error about missing libudev.so.0.

Run the game with LD_PRELOAD=/usr/lib/libudev.so.1.

Garry’s Mod

Game does not start

When an error about a missing client.so appears, try the following:

$ cd ~/.steam/root/steamapps/common/GarrysMod/bin/
$ ln -s libawesomium-1-7.so.0 libawesomium-1-7.so.2
$ ln -s ../garrysmod/bin/client.so ./

If the error mentions a missing library for libgconf-2.so.4, install AUR.

Opening some menus causes the game to crash

Most menus work fine, but ones with checkboxes (LAN multiplayer, mounted games list) do not work at all. This is a bug in the menu code.

If you prefer the default menu style and do not mind a hacky solution: Simon311 has written code with instructions to fix it.

If you do not care for the default menu style and want a more stable but feature-incomplete solution, Facepunch developer robotboy655 has written a new menu.

Game crashes after attempting to join server

While in the process of joining a server, downloading resources, etc, the game seems to hang and after a while, perhaps during the “sending client info” portion the game crashes, usually without any error messages. Error does not give much information, however, the process for Garry’s mod is killed.

This issue arises more often when joining servers with many addons like DarkRP servers specifically.

The problem seems to correlate with a weak GPU and the game is timing out from the server, so if the GPU is the problem, lowering the graphics settings to the minimum should fix the problem.

The problem seems to be related to RAM usage, once you hit around 2GB of RAM used, the game will crash. Servers with many addons have much more RAM usage, and lowering graphics settings to the minimum lowers RAM usage and mitigates crashes.

Using the experimental x86-64 branch may help mitigate this issue, however keep in mind that some addons may return errors while using this branch.

Gods will be watching

Follow #OpenSSL 1.0 setup.

GRID Autosport

Follow #OpenSSL 1.0 setup.

Black screen when trying to play

Run the game with LC_ALL=C.

Guns of Icarus Online

If you encounter problems, check out the error log at

 ~/.config/unity3d/Muse Games/GunsOfIcarusOnline/Player.log

version `CURL_OPENSSL_4′ not found (required by /usr/lib/libdebuginfod.so.1)

Install the package and include ‘libcurl.so.4’ in your LD_PRELOAD in your shell environment like so:

 export LD_PRELOAD=$LD_PRELOAD libcurl.so.4

Hack ‘n’ Slash

Crashes when trying to load a game

Prepend /usr/lib to LD_LIBRARY_PATH.

Hacker Evolution

Requires .

Half-Life

Invisible text

Half-Life uses microsoft fonts to display text, see Microsoft fonts for ways to install them.

Half-Life 2 and episodes

Cyrillic fonts problem

This problem can be solved by deleting “Helvetica” font.

Hammerwatch

The game does not start via Steam

Prepend /usr/lib to LD_LIBRARY_PATH.

No sound

Hammerwatch opens with a popup: “Sound Error” — “Could not initialize OpenAL, no sounds will be played. Try updating your OpenAL drivers.”

OpenAL, which Hammerwatch uses, defaults to PulseAudio. To change that, add the following line to /etc/openal/alsoft.conf:

drivers=alsa,pulse

This way, Hammerwatch will use ALSA. This solution was found here.

Harvest: Massive Encounter

Dependencies:

  • AUR

Compatibility

If the game refuses to launch and throws you into a library installer loop, run the Harvest executable instead of the run_harvest script.

Hatoful Boyfriend

Japanese text invisible

Install and .

HEARTBEAT

If FontConfig Errors on Start

Follow the same process described in #CrossCode.

HuniePop

Game crashes upon launch

Install .

Hyper Light Drifter

The controller does not work

Install and run the game with LD_PRELOAD=libSDL2.so.

See the following Steam Community discussions:

It is suggested to run the branch to get new fixes,
there however currently is a libcurl segfault keeping it from starting without special workarounds.

Missing libcurl.so.4 or version CURL_OPENSSL_3 not found

Install and run the game with LD_PRELOAD=libcurl.so.3.

Imperator: Rome

Paradox Launcher freezes or crashes after start.
Set your launch options to:

LD_PRELOAD=/usr/lib/libc.so.6 %command%

The Impossible Game

Dependencies:

The Inner World

Requires AUR for sound support.

Bringing up the inventory or main menu

Hold the tab key.

Cutscenes

The game has cutscenes. It starts directly with a cutscene before you start the actual game in the backyard. To see these cutscenes you need to use Oracle’s Java instead of the OpenJDK.

Furthermore you need the package AUR.

There seem to be problems with the Steam overlay. Try to run the game directly with /TIW_start.sh.

Note that cutscenes open in a new window. So pay attention to that and switch to the new window to enjoy the movies.

See the Steam Forums for details.

Insurgency

Game does not start

Set the following launch option

LD_PRELOAD='/usr/$LIB/libstdc++.so.6:/usr/$LIB/libgcc_s.so.1:/usr/$LIB/libxcb.so.1:/usr/$LIB/libgpg-error.so' %command%

Interloper

Requires .

Game does not start

The game can sometimes segfault due to an incompatibility with the Steam Runtime’s libasound.so.2.

Invisible Apartment

Requires .

Game does not start

If the game does not run when you launch it via Steam, try to directly run ./ia1 in the game directory.

Joe Danger 2: The Movie

Requires .

Compatibility

Game only worked after obtaining from the Humble Bundle directly and was installed.

Kerbal Space Program

See Kerbal Space Program.

Killing Floor

Cannot change screen resolution

If trying to modify the resolution in-game crashes your desktop environment, edit ~/.killingfloor/System/KillingFloor.ini:

[WinDrv.WindowsClient]
WindowedViewportX=
WindowedViewportY=
FullscreenViewportX=
FullscreenViewportY=
MenuViewportX=
MenuViewportY=

[SDLDrv.SDLClient]
WindowedViewportX=
WindowedViewportY=
FullscreenViewportX=
FullscreenViewportY=
MenuViewportX=
MenuViewportY=

Windowed mode

Uncheck fullscreen in the options menu, and press Ctrl+g to stop mouse capturing.

Stuttering sound

KillingFloor comes with its own OpenAL library /System/openal.so.

Back it up, install or (if using a 64bit system).

Then symlink the installed system library (/usr/lib32/libopenal.so.1 or /usr/lib/libopenal.so.1) to openal.so.

Left for Dead 2

Missing Chinese font

L4D2 Requires . Or add the following lines to ~/.config/fontconfig/fonts.conf

        <match target="pattern">
               <test qual="any" name="family">
                       <string>WenQuanYi Zen Hei</string>
               </test>
               <edit name="family" mode="assign" binding="same">
                       <string>Source Han Sans CN</string>
               </edit>
       </match>

Lethal League

Requires .

Life is Strange

Requires AUR.

Little Racers STREET

Install .

Move/backup /lib64/libSDL2_mixer-2.0.so.0.

Symlink /usr/lib/libSDL2_mixer-2.0.so.0 to /lib64/libSDL2_mixer-2.0.so.0.

The Long Dark

Game does not start

The 64-bit version fails to start. Either use the 32-bit version tld.x86 in the game directory or start the 64-bit version like so:

LD_PRELOAD=~/.steam/root/ubuntu12_32/steam-runtime/amd64/usr/lib/x86_64-linux-gnu/libSDL2-2.0.so.0 ./tld.x86_64

Game starts, but some overlay text is missing and cutscenes shows black screen

In addition to the command above, add the following to the Steam launch command:

-screen-fullscreen 0 -screen-width WIDTH_PIXELS -screen-height HEIGHT_PIXELS

For example, if you have a screen resolution of 1280×720 and are launching the x64 version from the terminal (within the directory which contains the binaries), the full command would be:

LD_PRELOAD=~/.steam/root/ubuntu12_32/steam-runtime/amd64/usr/lib/x86_64-linux-gnu/libSDL2-2.0.so.0 ./tld.x86_64 -screen-fullscreen 0 -screen-width 1280 -screen-height 720

and from Steam, the complete game launch options would be:

LD_PRELOAD=~/.steam/root/ubuntu12_32/steam-runtime/amd64/usr/lib/x86_64-linux-gnu/libSDL2-2.0.so.0 %command% -screen-fullscreen 0 -screen-width 1280 -screen-height 720

Cutscenes are still black

Turn off Vertical Sync in the Display options, and/or set POST FX to Low in the Quality options, and/or turn global Quality options down a notch.

Cursor disappears

Go to Options > Controls, and set mouse locking to unlocked.

The options is visible only if you are navigating using your (invisible) mouse. It will not show up when navigating with a controller.
One solution is to go to Options -> Controls with a controller before switching to the mouse and trying to blindly it the setting.

Grand Theft Auto V

Game crashes in Online

If you experience crashes in GTA Online (e.g. when creating a new character), set these launch options:

PROTON_NO_ESYNC=1 WINEDLLOVERRIDES=winedbg.exe=d %command%

Graphical Issues using a NVIDIA GPU

Try launch options: -force-glcore42 -force-clamped

Magicka 2

Indefinitely stuck at start

The game does not start if the output of the command “ip -s link” is longer than 4096 characters. That is because, in the function bitsquid::network_info(char*), where they query the networking information, they do not handle that case correctly.
See this picture for reference.
It was reported to upstream (Pieces Interactive) but Magicka 2 does not seem to be maintained anymore.

A dirty fix is to wrap your ip binary, as such:

#!/bin/bash
if [[ [email protected] == "-s link" ]]; then
    echo "<paste a smaller subset of the normal output>"
else
    /path/to/your/real/ip "[email protected]"
fi

Mark of the Ninja

Bad sound

Prepend /usr/lib to LD_LIBRARY_PATH.

Metro: Last Light

The game does not allow you to change its resolution on a multi-monitor setup on GNOME with the AMD Catalyst drivers. A temporary workaround is to disable the side monitors.
Jason over at unencumbered by facts managed to get it working with his multi-monitor setup using a single display server, he however is using Nvidia.

Metro: 2033 Redux

No sound

Install

No image

Try setting r_fullscreen off in ~/.local/share/Steam/steamapps/common/Metro 2033 Redux/user.cfg.

Middle-earth: Shadow of Mordor

Floating heads

Run the game with __GL_ShaderPortabilityWarnings=0.

Mount & Blade: Warband

Segmentation fault (core dumped) with wayland

Use Xorg instead.

DLC Chooser

Requires AUR.

Crash on startup

Set launch options to:

LD_LIBRARY_PATH="." %command%

Move or Die

No Sound

Install .

Multiwinia

Requires .

Crash on startup

If Multiwinia crashes on startup on X64 systems, force launching the 32-bit executable by replacing /run_steam.sh with the following script:

#!/bin/sh
./multiwinia.bin.x86

See [12].

Natural Selection 2

is required, furthermore, you must also execute

$ ln -s /usr/lib/libsndio.so x64/libsndio.so.6.1

within the root of the NS2 directory.
This is because NS2 uses an older outdated version of sndio, but it is still compatible with the new version, thankfully.

For a more minimal solution, one can attempt to set the audio driver used through the environment variable SDL_AUDIODRIVER. For example, SDL_AUDIODRIVER=sndio or SDL_AUDIODRIVER=alsa.

The environment variable SDL_VIDEODRIVER must not be set to wayland.
Try setting SDL_VIDEODRIVER to x11 if it still does not work.

No Man’s Sky

Black screen at start

Edit ~/Steam/SteamApps/common/No Man's Sky/Binaries/SETTINGS/TKGRAPHICSSETTINGS.MXML and set FullScreen to false and Borderless to true.

White screen at start

If you get a white screen, it may seem like the game has froze, but it has not. Hold down e to continue.

Nuclear Throne

Missing libcurl.so.4 or version CURL_OPENSSL_3 not found

Install and run the game with LD_PRELOAD=libcurl.so.3.

OneShot

Game fails to start

This problem occurs because the game use outdated libraries. Go to the game directory and remove libdrm.so.2, libGLdispatch.so.0, libstdc++.so.6 and librt.so.1. Those files usually have an equivalent already installed on the system.

File _______ will not run

The executable _______ may fail when run from the Documents folder. It also exists in the game directory and will run from there.

Oxygen Not Included

World generation hangs

This problem occurs with locales that use comas instead of dots to separate decimals.

Set launch options in steam to LANG=C %command%.[13]

Penumbra: Overture

Dependencies:

Windowed mode

There is no in-game option to change to the windowed mode, you will have to edit ~/.frictionalgames/Penumbra/Overture/settings.cfg to activate it.

Find FullScreen="true" and change it to FullScreen="false", after this the game should start in windowed mode.

Portal 2

Game does not start

Several OpenGL-related errors (such as PROBLEM: You appear to have OpenGL 1.4.0, but we need at least 2.0.0! or libGL error: driver pointer missing) are caused by Portal 2 bundling an old libstdc++ file. This error is especially common with open source Radeon drivers (radeonsi).

A problem with libstdc can be fixed by running the game with LD_PRELOAD='/usr/$LIB/libstdc++.so.6'.

Resolution too low

When the game starts with a resolution so low that you cannot reach the game settings,
run the game in windowed mode using the -windowed flag.

Missing non Latin font

The phenomenon is no menu in Portal. Portal and Portal2 use Helvetica, add the following lines to ~/.config/fontconfig/fonts.conf:

<match target="pattern">
    <test qual="any" name="family">
        <string>Helvetica</string>
    </test>
    <edit name="family" mode="assign" binding="same">
        <string>Source Han Sans CN</string>
    </edit>
</match>

You can replace “Source Han Sans CN” by your favoriate and existing font.

Prison Architect

ALSA error when using PulseAudio

The error:

ALSA lib pcm_dmix.c:1018:(snd_pcm_dmix_open) unable to open slave

was resolved by installing:

per PulseAudio#ALSA.

Alternatively, if running the game through Steam, you can force the game to be ran through proton, and that can resolve other audio errors.

You can do this by opening the game’s properties through steam, and under “general” tick the “Force the use of a specific Steam Play comparability tool”, and then select a proton version from the dropdown below

Game only starting in safe mode

If the game does not start, but steam thinks it is running, probably the Paradox launcher has problems running properly.
If this is the case, you will find some processes running in background:

ps -ef|grep paradoxlauncher

Kill them all, then modify the game startup options as follows:

LD_PRELOAD=/usr/lib64/libc.so %command%

Eventually, if the above option has not worked, an option to skip it:

./PrisonArchitect %command%

Note: even if we are using another executable to start the game, %command% has to be added at the end of the command to trick Steam.

Project Zomboid

Requires .

No sound

Prepend /usr/lib to LD_LIBRARY_PATH.

In the game, go to the options and set all audio to the proper volume.

Pyre

Game does not start

Remove /lib64/libSDL2-2.0.so.0.

If this does not work, downgrade sdl2.

Then add sdl2 to IgnorePkg in /etc/pacman.conf.

IgnorePkg = sdl2

Redshirt

Requires if you use PulseAudio.

Revenge of the Titans

Requires and .

Rise of the Tomb Raider

Run in an X session.

Risk of Rain

Requires .
Refer to #Missing libcurl.so.4 or version CURL_OPENSSL_3 not found.

Rock Boshers DX: Directors Cut

Requires .

Saints Row: The Third

Impossible to save custom display settings

Although game settings menu allows to choose custom display settings, the game may have problems saving them.

In such case, adjust these settings manually in the game’s display.ini file at:

"${HOME}/.local/share/Steam/steamapps/common/Saints Row the Third/display.ini"

The comments in this file explain well all the settings and acceptable values.

Incorrect screen resolution in game

This can occur when game is launched in a multi-head environment, with some monitors rotated, etc., so the game detects available screen resolutions incorrectly.

In such case, adjust ResolutionWidth and ResolutionHeight options in the display.ini file. Also, one must set option VerifyResolution = false.

Saints Row IV

The factual accuracy of this article or section is disputed.

Reason: General settings not specific to this game (Discuss in

General settings not specific to this game (Discuss in Talk:Steam/Game-specific troubleshooting

Run the game with /usr/lib32/libGLX_nvidia.so appended to the LD_PRELOAD.

Game causes GPU lockup with mesa drivers

Saints Rows IV can cause a GPU lockup when trying to play on certain AMD
hardware using open source drivers: Bug 93475.

A workaround is to run the game with R600_DEBUG=nosb.

Serious Sam 3: BFE

No audio

Try running:

# mkdir -p /usr/lib/i386-linux-gnu/alsa-lib/
# ln -s /usr/lib32/alsa-lib/libasound_module_pcm_pulse.so /usr/lib/i386-linux-gnu/alsa-lib/

If that does not work, try tweaking ~/.alsoftrc as proposed by the Steam community (Serious Sam 3: BFE uses OpenAL to output sound). If you are not using Pulse Audio, you may want to write the following configuration:

~/.alsoftrc
[general]
drivers = alsa
[alsa]
device = default
capture = default
mmap = true

SJ-19 Learns to Love

If the game crashes at startup with this error in Steam’s output:

/home/username/.local/share/Steam/steamapps/common/SJ-19 Learns To Love/sj-19-linux/sj-19-learns-to-love.x86_64: error while loading shared libraries: libsteam_api.so: cannot open shared object file: No such file or directory

Right click the game in steam, select Properties, and set this in Launch Options:

LD_LIBRARY_PATH=./sj-19-linux %command%

Slay the Spire

If the game does not start or crashes at startup, install .

If the game does not move sink input, you can edit the following file to allow sink moves:

~/.alsoftrc
[pulse]
allow-moves=yes

Stick Fight: The Game

If the game does not launch, try appending PROTON_USE_WINED3D=1 %command% to force using WINE direct3D.
To do this you must have installed

Songbringer

Launch error with Wayland

Install and run the game with LD_PRELOAD=/usr/lib/libglfw.so.3.

Space Pirates and Zombies

Requires .

No audio

Try running:

# mkdir -p /usr/lib/i386-linux-gnu/alsa-lib/
# ln -s /usr/lib32/alsa-lib/libasound_module_pcm_pulse.so /usr/lib/i386-linux-gnu/alsa-lib/

If that does not work, try tweaking ~/.alsoftrc as proposed by the Steam community (Serious Sam 3: BFE uses OpenAL to output sound). If you are not using Pulse Audio, you may want to write the following configuration:

~/.alsoftrc
[general]
drivers = alsa
[alsa]
device = default
capture = default
mmap = true

Spacechem

Dependencies:

Game crash

The shipped x86 version of Spacechem does not work on x64 with the game’s own libSDL* files, and crashes with some strange output.

To solve this just remove the three files libSDL-1.2.so.0, libSDL_image-1.2.so.0, libSDL_mixer-1.2.so.0 from the game directory.

Splice

Requires .

The Stanley Parable

Game will not start

As discussed in the Steam store page, remove bin/libstdc++.so.6 from the game folder.

Shadow Tactics: Blades of the Shogun

Dependencies:

  • AUR

Shadows of Adam

Old Pango Version Dependency

Build pango 1.27.1 and copy the libpango* libraries into the game directory as recommended here.

Stardew Valley

Unable to move or input text

When in game, you are stuck in your bed as you cannot move your character or you cannot enter text into the input fields when starting a new game. This is a bug with the SDL2 lib bundled with the game.

Install .

Modify this config line:

~/.steam/steam/steamapps/common/Stardew\ Valley/MonoGame.Framework.dll.config
<dllmap dll="SDL2.dll" os="linux" cpu="x86-64" target="./lib64/libSDL2-2.0.so.0"/>

To this (the period is removed at the beginning of target):

~/.steam/steam/steamapps/common/Stardew\ Valley/MonoGame.Framework.dll.config
<dllmap dll="SDL2.dll" os="linux" cpu="x86-64" target="/lib64/libSDL2-2.0.so.0"/>

Steel Storm: Burning Retribution

Start with black screen

The game by default tries to launch in fullscreen mode with a resolution of 1024×768,
which does not work on some devices (for example the Samsung Series9 laptop with Intel hd4000 video).

Run the game in windowed mode by using the -window flag. Then change the resolution in-game.

Stellaris

No window opening, only sound

Happens with some AMD GPU and mesa combination, set multi_sampling=0 in ~/.local/share/Paradox\ Interactive/Stellaris/settings.txt.

On some window managers (eg Xmonad) you should set fullScreen=no.

Immediate crash to desktop

It seems that Stellaris requires a 32bit libnss_sss.so.2 to operate. You can confirm if this is your problem by running

# strace ~/.local/share/Steam/steamapps/common/Stellaris/stellaris 2>&1 | grep sss 

and seeing if you get output like

# openat(AT_FDCWD, "/usr/lib32/tls/i686/sse2/libnss_sss.so.2", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (No such file or directory)

If this is indeed your problem, download the libnss-sss package from Ubuntu’s repository [14], extract the libnss_sss.so.2 from the downloaded package, and place it at ~/.local/share/Steam/steamapps/common/Stellaris. The game should now load properly.

Stephen’s Sausage Roll

No sound

If using native libraries and is installed, Unity may try to use that library for sound and fail.
To test if this is the problem, try removing or renaming the package files that are named libpulse-simple*. To see which files are relevant, run:

$ pacman -Qql libpulse | grep /usr/lib/libpulse-simple
/usr/lib/libpulse-simple.so
/usr/lib/libpulse-simple.so.0
/usr/lib/libpulse-simple.so.0.1.0

If renaming any of those files works for you, you can proceed with the following instructions (revert any renaming you just did). Browse to the game’s directory:

$ cd "$HOME/.steam/root/steamapps/common/Stephen's Sausage Roll"

And create a sub-directory that we can use to hold 0-byte look-alike library files:

$ mkdir noload/

Use touch to create 0-byte versions of the above files that we want the dynamic linker to skip, e.g.:

$ touch noload/{libpulse-simple.so,libpulse-simple.so.0,libpulse-simple.so.0.1.0}

Note: Only a 0-byte libpulse-simple.so.0 file may be required.

After you have created these 0-byte files, you can now attempt to run the game binary directly, telling the dynamic linker to use our 0-byte files:

$ LD_LIBRARY_PATH="noload/:$LD_LIBRARY_PATH" ./Sausage.x86_64

If everything works up to this point, prepend noload/ to your LD_LIBRARY_PATH.

Again, this should work because Steam checks for a noload/ directory relative to the game’s directory. The dynamic linker should respect the $LD_LIBRARY_PATH variable and fail to load the necessary files. The game should then fallback to plain ALSA.

Superbrothers: Sword & Sworcery EP

Dependencies:

  • if you use PulseAudio

The game bundles an outdated version of libstdc++ which prevents the game from starting. [15] The following can be observed when you run Steam and S&S from the terminal:

libGL error: unable to load driver: i965_dri.so
libGL error: driver pointer missing
libGL error: failed to load driver: i965
libGL error: unable to load driver: i965_dri.so
libGL error: driver pointer missing
libGL error: failed to load driver: i965
libGL error: unable to load driver: swrast_dri.so
libGL error: failed to load driver: swrast

To solve this problem remove /lib/libstdc++.so.6*. After that the game will use the libstdc++ from Steam.

System Shock 2

You get these errors when running it with the native client:

C:\windows\system32\winedevice.exe: symbol lookup error: /usr/lib32/libX11.so.6: undefined symbol: xcb_wait_for_reply64
C:\windows\system32\wineboot.exe: symbol lookup error: /usr/lib32/libX11.so.6: undefined symbol: xcb_wait_for_reply64

Just delete or rename the libxcb library it got shipped with:

mv /mnt/olhdd/steam/steamapps/common/SS2/lib/libxcb.so.1{,.old}
mv /mnt/olhdd/steam/steamapps/common/SS2/lib/libxcb.so.1.1.0{,.old}

Game will not launch

If you encounter the game not launching do the following:

Cut & Paste libsteam_api.so from the “SS2/Bin” folder within the main steam common folder and transfer it to “SS2” main game folder not the sub folder “SS2/bin”

After Cut & Paste put LD_PRELOAD=’/usr/$LIB/libxcb.so.1′ %command% into the Launch options

Once all of these have been implemented the game should work after hitting play on steam.

Resolution fix

You may encounter some resolution problems with this game on steam not working properly in full screen mode. Do the following:

Open cam.cfg in the SS2 folder you may have to search for it via the search mode while in the game folder:

Place game_screen_size 1024 768 or game_screen_size 1920 1080 depending on your resolution & put game_full_screen 1 into bottom of the cam.cfg file.

Then go to cam_ext.cfg and next to the display setting place a simi-colon prefix next to the use_d3d_display option so it should be like this ;use_d3d_display it should then properly not go off-screen and should stay full screen within the active main screen.

Tabletop Simulator

CJK characters not showing in game

Install and .

Team Fortress 2

Requires .

HRTF setup

Assuming HRTF (head-related transfer function) has been properly set up in the operating system, HRTF will not be enabled unless you disable the original processing. To do so, use

dsp_slow_cpu 1

For best results, also change the following:

snd_spatialize_roundrobin 1
dsp_enhance_stereo 0
snd_pitchquality 1

Loading screen freeze

If you are a non-English (speaking) user, you have to enable “en_US.UTF-8” in the locale.gen! Generate a new locale after that.

No audio

It happens if there is no PulseAudio in your system.
If you want to use ALSA, you need to launch Steam or the game directly with SDL_AUDIODRIVER=alsa
(From SteamCommunity).

If it still does not work, you may also need to set the environment variable AUDIODEV. For instance AUDIODEV=Live. Use aplay -l to list the available sound cards.

Slow loading textures

If you are using Chris’ FPS Configs or any other FPS config, you may have set mat_picmip to 2. This spawns multiple threads for texture loading, which may cause more jittering and lag on Linux, especially on alternative kernels. Try setting it to -1, the default.

“Invalid color format” Error at loading screen on integrated Intel Atom/BayTrail HD Graphics

Add the following to the game startup options:
-force_vendor_id 0x10DE -force_device_id 0x1180

These options deceive the game engine that we are having a Nvidia GPU, not Intel/AMD.

Terraria

See the KNOWN ISSUES & WORKAROUNDS​ section of the release announcement.

Input Issues

The symptoms of this problem are: When moving after standing still, your character seems to vary their speed, if wearing running boots they do not activate. When jumping with an item for double jumping sometimes you double jump even if you just jumped once. Going up/down ropes seems slow/choppy.

The solution is to preload the system SDL2 libraries: LD_PRELOAD='/usr/$LIB/libSDL2-2.0.so:/usr/lib32/libSDL2-2.0.so' For more information: Terraria Forums[dead link 2021-05-17 ⓘ]

This War of Mine

Game does not start

This happens because of an incompatibility with the newer version of lib32-curl. To fix the problem , set your launch options to:

 LD_PRELOAD=./libcurl.so.4 %command%

Sound glitches with Steam native

The bundled libOpenAL might not work correctly, try symlinking /usr/lib32/libopenal.so to /libOpenAL.so.

Ticket to Ride

Dependencies:

  • AUR
  • AUR

As lib32-gstreamer0.10-base is quite hard to build you can use alucryd-multilib repo for this package

The Tiny Bang Story

Missing libGLEW.so.1.6

# ln -s /usr/lib32/libGLEW.so.1.10.0 /usr/lib32/libGLEW.so.1.6

Tomb Raider (2013)

Game immediately closes when running with steam-native

Tomb Raider has a very heavy amount of dependency on the Steam runtime, the easiest solution is to just run it using the runtime.

Steam Controller not working in-game

If your Steam Controller is correctly recognized and paired but still not working in-game try the following:

  • In Steam, non Big Screen, go to and in the dropdown select box select Steam Beta Update
  • Restart Steam
  • Go to Big Screen and start Tomb Raider

Correctly recognized means you can control the desktop mouse and Steam in Big Picture mode and the controller is shown in the Big Picture settings.

Failed to Initialize Direct3D

This can happen when switching monitors.

You need to manually edit the preferences file (found in ~/.local/share/feral-interactive/Tomb Raider/) and change the ExclusiveFullscreen option to 0. After this you should be able to successfully start the game (after which you may exit and revert that option to a 1 to restore fullscreen).

Stuck at the start menu

Tomb Raider for Linux will not start if there are any active VPNs that use TUN devices. This is because it makes incorrect assumptions about the return value of getifaddrs(). The only reason it calls getifaddrs() is to get the MAC address for a Version 1 UUID, and fall back to a different algorithm if getifaddrs() returns no interfaces at all.

One optional solution for such a situation is listed down below, which fixes assumptions made by Tomb Raiders about the output of getifaddrs() (see tomb_raider_vpn_fix/releases for the original code):

#include <stdio.h>
#include <errno.h>
#include <ifaddrs.h>

int getifaddrs(struct ifaddrs **ifap) {
   fprintf(stderr, "\n\n\n---------------- dummied out getifaddrs()!\n\n\n");
   *ifap = NULL;
   return 0;
}

void freeifaddrs(struct ifaddrs *ifap) {
   /* do nothing */
}

Compile it using

$ gcc -m32 -fPIC -shared .c -o .so -ldl -Wall

Then use the following launch option:

env LD_PRELOAD=$LD_PRELOAD:.so %command%

Torchlight 2

Libfreetype/libfontconfig Incompatibility

If you are experiencing issues with launching games such as Torchlight 2 or Civilization IV, it could be due to using a newer libfontconfig than the game currently supports.

Right click the game in Steam, and set the following as its launch option:

LD_PRELOAD=/usr/lib/libfreetype.so.6 %command%

then attempt launching the game.

Alternately, re-naming or deleting these 2 files will force it to use your system’s libraries:

Torchlight 2/game/lib/libfreetype.so.6
Torchlight 2/game/lib64/libfreetype.so.6

Locale incompatibility

Some users report that Torchlight 2 does not work if you do not have en_US.UTF8 in your locale.

Double check you have generated the locale needed in Steam Installation Requirements.

Tower Unite

Graphical Glitches

This is a known issue, and it occurs because the shaders had not been ported to Linux yet by the developers.
To minimize glitches and make the game playable add -opengl4 to your launch options,
set Ocean Quality to “Potato” and Effects Quality to “Low” in the game settings.

Towns / Towns Demo

Requires Java.

Transistor

Crash on launch / FMOD binding crash / audio issues

Run the game with:

LD_PRELOAD='/usr/lib/libstdc++.so.6:/usr/lib/libgcc_s.so.1:/usr/lib/libxcb.so.1:/usr/lib/libasound.so.2'

Otherwise, run the game via shell and set up proper audio device for FMOD, as discussed in [16].

Also, check out this thread [17].

Transmissions: Element 120

Dependencies:

Troubleshooting

Make sure you have all libraries installed. Above the standard set required by Steam runtime, the game requires few additional ones. The typical error message that indicates that is

AppFramework : Unable to load module vguimatsurface.so!

To find missing dependencies go into the game directory and run:

LD_LIBRARY_PATH=bin ldd bin/vguimatsurface.so

Look for entries that say .

Transport Fever 2

Game will not launch

Rename or delete the following files in game directory (~/.steam/steam/steamapps/common/Transport Fever 2) as discussed in [18]

  • libstdc++.so.6
  • libstdc++.so.6.0.25

Trine 2

Dependencies:

Fullscreen

Game crashes if started in fullscreen mode, but starts in windowed mode. After start the window can be set to fullscreen (borderless window) if your window manager supports this.
steam forum

Colors

If colors are wrong with FOSS drivers (r600g at least), try to run the game in windowed mode, rendering will be corrected. (bug report)

Sound

The factual accuracy of this article or section is disputed.

Reason: General settings not specific to this game (Discuss in

General settings not specific to this game (Discuss in Talk:Steam/Game-specific troubleshooting

If sound plays choppy, try:

/etc/openal/alsoft.conf
drivers=pulse,alsa
frequency=48000

Resolution

If the game resolution is wrong when using a dual monitor setup and you cannot see the whole window edit ~/.frozenbyte/Trine2/options.txt and change the options ForceFullscreenWidth and ForceFullscreenHeight to the resolution of your monitor on which you want to play the game.

Crash on start in libX11.so.6.3.0

gdb may report a crash in XGetICValues(), probably due to a bug in SDL1.3; fortunately SDL2.0 is compatible with trine 2, so just force it and see if it works by modifying the steam launch options (or by script/commandline if using the drm free version).

LD_PRELOAD="/usr/lib32/libSDL2.so"  %command%

Tropico 5

Blank screen with sound only on startup

Run the game with MESA_GL_VERSION_OVERRIDE=4.0 MESA_GLSL_VERSION_OVERRIDE=400.

Unbound: Worlds Apart

If your controller doesn’t work, try selecting the game in your inventory, click the gear icon on the right,
then Properties, Controller, and select Disable Steam Input in the dropdown.

Unity of Command

Requires .

Squares

If squares are shown instead of text, try removing /bin/libpangoft2-1.0.so.0.

No audio

If you get this error:

ALSA lib dlmisc.c:254:(snd1_dlobj_cache_get) Cannot open shared library /usr/lib/i386-linux-gnu/alsa-lib/libasound_module_pcm_pulse.so

Try running:

# mkdir -p /usr/lib/i386-linux-gnu/alsa-lib/
# ln -s /usr/lib32/alsa-lib/libasound_module_pcm_pulse.so /usr/lib/i386-linux-gnu/alsa-lib/

Unity3D

Games based on the Unity3D engine, like or may need the package to understand that they run on Linux and work properly.

Locale settings

Games made in C# often have a problem with some locales (e.g. Russian, German) because developers do not specify locale-agnostic number formatting. This can result in some game screens loading only partially, problems with online features or other bugs.

To work around this, run the game with LC_ALL=C.

Affected games: .

Unity 5 sound problems

The sound system in Unity 5 changed and to be able to play games created with it you must most likely install and run PulseAudio.

Another solution is to disable the Steam runtime: in the launch options for the game, write this: LD_LIBRARY_PATH="" %command%

Another solution is to prevent Unity from trying to use pulseaudio using AUR package from the AUR. Once it is installed, use the following as launch options :/usr/bin/pulsenomore %command%

Affected games:

Game launching on wrong monitor in fullscreen mode

Unity games that do not support monitor selection will most likely launch the game on a wrong monitor.

The problem is that Unity games write the default parameter <pref name="UnitySelectMonitor" type="int">-1</pref> to the game config file.

This will lead to the game launching on a non-primary monitor.

When changing to value into <pref name="UnitySelectMonitor" type="int"></pref> for the according game, the game will start on the correct (primary) monitor.

A Unity game config file usually resides in ~/.config/unity3d///prefs.

Affected games: .

Be aware that some games do not support setting that parameter, it will simply be ignored. This is the case for , , .

Chinese/Japanese/Korean display bug

Install and . Then

#fc-cache -fv

Game does not respond

Add the following line to your launch options :

SDL_DYNAMIC_API=/usr/lib/libSDL2-2.0.so %command%

Unrest

Requires .

Volgarr the Viking

Delete the lib directory in the game directory to get rid of the libGL errors.

War Thunder

No audio

If there is no audio after launching the game, install .

Blank screen

If having a green or blank screen on startup, run the game with MESA_GL_VERSION_OVERRIDE=4.1COMPAT. [19] [20][dead link 2020-04-03 ⓘ]

steam startup WarThunder need set startup options XMODIFIERS="" %command%

Warhammer 40,000: Dawn of War II

Dependencies:

The start script does not point to the right direction of libasound.so.2.

To fix it open /DawnOfWar2.sh and replace the following lines:

HAS_LSB_RELEASE=$(command -v lsb_release)
if [ -n "${HAS_LSB_RELEASE}" ] && [ "$(lsb_release -c | cut -f2)" = "trusty" ]; then
	LD_PRELOAD_ADDITIONS="/usr/lib/x86_64-linux-gnu/libasound.so.2:${LD_PRELOAD_ADDITIONS}"
fi 

with:

LD_PRELOAD_ADDITIONS="/usr/lib64/libasound.so.2:${LD_PRELOAD_ADDITIONS}"

Wasteland 2

If Wasteland 2 immediately exits when you try to launch it there may not be enough system file descriptors available. To increase the descriptor limit edit /etc/security/limits.conf and add the line:

* hard nofile 524288

Then reboot for the new limit to take effect, Wasteland 2 should now launch and this setting might also fix other games.

We Were Here

Stuck on black screen or logo on launch

Add -screen-fullscreen 0 to launch options. [21]

Worms W.M.D

The game includes several workarounds in the Run.sh script, however these may not work and it is easy to get the game running without this script.

First, try running the game directly from its game directory using Worms W.M.Dx64. If you get a “No such file or directory” error about libcurl-gnutls, install . If the game crashes after playing the intro movies, add the Steam Runtime dbus libraries to the game’s library directory:

$ ln -s ~/.steam/steam/ubuntu12_32/steam-runtime/amd64/lib/x86_64-linux-gnu/*dbus* ~/.steam/steam/steamapps/common/WormsWMD/lib

Now the game should run using the default “Play Worms W.M.D” option. See also Steam community discussions [22] and [23].

On some systems there are terrain bugs where holes in terrain are not rendered properly and worms can fall through terrain unexpectedly. These bugs can make the game unplayable in many situations and there is no known fix for them.

Witcher 2: Assassin of Kings

Dependencies:

Game does not start

The game will not start with SDL set to use wayland. You can have only the game run in x11 by adding the following launch options in steam:

$ SDL_VIDEODRIVER=x11 %command%

If the game does not run, enable error messages:

$ LIBGL_DEBUG=verbose ./witcher2

Wizardry 6: Bane of the Cosmic Forge

Requires DOSBox.

To fix the crash at start, open /dosbox_linux/launch_wizardry6.sh and:

  1. comment the line export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:./libs
  2. change the beginning of the line starting with exec ./dosbox to exec dosbox

World of Goo

Changing resolution

To change the game resolution edit the section in /properties/config.txt. For example:

<!-- Graphics display -->
<param name="screen_width" value="1680" />
<param name="screen_height" value="1050" />
<param name="color_depth" value="0" />
<param name="fullscreen" value="true" />
<param name="ui_inset" value="10" />

X3: Terran Conflict

Game crashes on startup

The game may crash on startup because it is linked to libz version 1.2.9, while the latest version of this library in Arch Linux is higher. The following message in the terminals appears in this case:

./X3TC_config: lib/libz.so.1: version 'ZLIB_1.2.9' not found (required by /usr/lib32/libpng16.so.16

Renaming or removing lib/libz.so.1 may help.

X Rebirth

Game crashes on startup

The game may crash on startup because it is linked to the shadergl function of the game. Do the follow in the …/steamapps/common/X Rebirth/shadergl/shaders/common.fh file.

--- ./common.fh.orig
+++ ./common.fh
@@ -574 +574 @@
-       /*      OUT_COLOR.rgb *= 0.0001; OUT_COLOR.rgb += half3(specstr);/**/   \
+       /*      OUT_COLOR.rgb *= 0.0001; OUT_COLOR.rgb += half3(specstr);*/     \
@@ -622 +622 @@
-       /*      OUT_COLOR.rgb *= 0.0001; OUT_COLOR.rgb += LightColor.xyz/ 10;/**/       \
+       /*      OUT_COLOR.rgb *= 0.0001; OUT_COLOR.rgb += LightColor.xyz/ 10;*/ \

After this workaround is implemented the game should load as normal.

XCOM

Dependencies:

  • (required to enable keyboard functionality in-game)

Hangs on startup

If you are running a hybrid graphics system, try:

__GL_THREADED_OPTIMIZATIONS=0 primusrun %command%

Graphical glitches on Intel HD

XCOM: Enemy Unknown may not recognize the SDL2 shared libraries shipped with the Steam runtime.
Check if the binary finds all required files and install missing packages if necessary ( and ).

ldd binaries/linux/game.x86_64 

XCOM 2

Unable to start with steam native

needs libgconf-2.so.4 which is not avaliable in arch repos, loading it from steams runtime seems to work.

LD_PRELOAD="$HOME/.local/share/Steam/ubuntu12_32/steam-runtime/usr/lib/x86_64-linux-gnu/libgconf-2.so.4" %command%

[NEW] Official Team Fortress Wiki | wiki dota – Vietnamnhanvan

Contributing

If you would like to help in writing API documentation there is a tool available here (requires python) that can generate skeleton documentation pages
that match the style guidelines and can be easily copied and pasted.

Otherwise be sure to follow the existing structure and format of the documentation to keep things consistent.

Common elements

Parameters

Most WebAPI methods take the following arguments in their URL:

key
Your Steam Web API key. Without this, the server will return an HTTP 403 (forbidden) error. A key can be generated here.
format
The file format to return output in.

json (default)
The JavaScript Object Notation format
xml
Standard XML
vdf
Valve Data Format
language
The ISO639-1 language code for the language all tokenized strings should be returned in. Not all strings have been translated to every language. If a language does not have a string, the English string will be returned instead. If this parameter is omitted the string token will be returned for the strings.

Terminology

A “tokenized string” refers to a string containing “#“-prefixed tokens that are replaced with the equivalent string in the game’s VDF for the chosen language. For instance, “TF_Weapon_Jar” is defined as “Jar Based Karate” in tf/resource/tf_english.txt (as found in “team fortress 2 content.gcf”).

Methods

General interfaces

ISteamApps
Methods relating to Steam Apps in general.

GetAppList
Full list of every publicly facing program in the store/library.
GetServersAtAddress
Shows all steam-compatible servers related to a IPv4 Address.
UpToDateCheck
Check if a given app version is the most current available.
ISteamEconomy
Methods relating to games’ store’s assets.

GetAssetClassInfo
Asset metadata
GetAssetPrices
Prices of items in the economy.
ISteamNews
Methods relating to Steam News.

GetNewsForApp
News feed for various games
ISteamRemoteStorage
Methods relating to stored files.

GetCollectionDetails
GetPublishedFileDetails
GetUGCFileDetails
UGC file size, local filename, and URL.
ISteamUser
Methods relating to Steam users.

GetFriendList
User friend list
GetPlayerBans
Player ban/probation status
GetPlayerSummaries
User profile data
GetUserGroupList
Lists Group ID(s) linked with 64 bit ID
ResolveVanityURL
Resolve vanity URL parts to a 64 bit ID.
ISteamUserStats
Methods relating to User stats.

GetGlobalAchievementPercentagesForApp
Statistics showing how much of the player base have unlocked various achievements.
GetGlobalStatsForGame
GetNumberOfCurrentPlayers
Returns the current number of players for an app.
GetPlayerAchievements
Game achievements
GetSchemaForGame
GetUserStatsForGame
IPlayerService
Methods relating to a Steam user’s games.

GetRecentlyPlayedGames
GetOwnedGames
GetSteamLevel
GetBadges
GetCommunityBadgeProgress
ISteamWebAPIUtil
Methods relating to the WebAPI itself.

GetServerInfo
Returns WebAPI server time & checks server status.
GetSupportedAPIList
Lists all available WebAPI interfaces.

Game specific interfaces

Generic

IEconItems_<ID>
Methods relating to in-game items for supported games.

GetPlayerItems
Lists items in a player’s backpack.
GetSchema
Information about the items in a supporting game.
GetSchemaURL
Returns a URL for the games’ item_game.txt file.
GetStoreMetadata
Information about the game’s store.
GetStoreStatus
The game’s store status.
IGCVersion_<ID>
TODO.

GetClientVersion
TODO
GetClusterVersion
TODO
GetServerVersion
TODO
ITFPromos_<ID>
TODO.

GetItemID
TODO
GrantItem
TODO

Dota 2

IDOTA2Match_<ID>
Methods relating to Dota 2 matches.

GetLeagueListing
Information about DotaTV-supported leagues.
GetLiveLeagueGames
A list of in-progress league matches, as well as details of that match as it unfolds.
GetMatchDetails
Information about a particular match.
GetMatchHistory
A list of matches, filterable by various parameters.
GetMatchHistoryBySequenceNum
A list of matches ordered by their sequence num.
GetScheduledLeagueGames
A list of scheduled league games coming up.
GetTeamInfoByTeamID
A list of all the teams set up in-game.
GetTournamentPlayerStats
Stats about a particular player within a tournament.
GetTopLiveGame
TODO
IEconDOTA2_<ID>
Methods relating to the Dota2 economy.

GetGameItems
Dota 2 In-game items
GetItemIconPath
TODO
GetHeroes
A list of heroes within Dota 2.
GetRarities
Dota 2 item rarity list.
GetTournamentPrizePool
The current prizepool for specific tournaments.
GetEventStatsForAccount
TODO
IDOTA2MatchStats_<ID>
TODO.

GetRealtimeStats
TODO
IDOTA2Fantasy_<ID>
Methods relating to the Dota 2 fantasy team system.

GetFantasyPlayerStats
TODO
GetPlayerOfficialInfo
TODO
IDOTA2StreamSystem_<ID>
Methods relating to the Dota 2 streaming system.

GetBroadcasterInfo
TODO
IDOTA2Teams_<ID>
Methods relating to Dota 2 teams.

GetTeamInfo
TODO
IDOTA2AutomatedTourney_<ID>
TODO

GetActiveTournamentList
TODO
IDOTA2Ticket_<ID>
TODO

SetSteamAccountPurchased
TODO
SteamAccountValidForEvent
TODO

Portal 2

IPortal2Leaderboards_<ID>
Methods relating to Portal 2 Leaderboards.

GetBucketizedData
TODO

Other undocumented interfaces

ISteamGameServerAccount
TODO
ISteamOAuth2
TODO
ISteamUserAuth
TODO
ISteamWebUserPresenceOAuth
TODO

Notes

List of IDs

240
Counter-Strike: Source
260
Counter-Strike: Source Beta
440
Team Fortress 2
520
Team Fortress 2 Beta
570
Dota 2
620
Portal 2
710
Counter-Strike: Global Offensive Beta Dev
730
Counter-Strike: Global Offensive
816
Dota 2 Private Beta
841
Portal 2 Beta
205790
Dota 2 (Beta) Test

Methods Requiring a 64-bit User ID

Most API requests that take an ID parameter require a 64 bit ID, if one is not readily available a vanity URL part can be resolved via ResolveVanityURL.

Implementations

  • Steam Condenser Ruby, PHP, and Java library.
  • Steamodd Python library, used by OPTF2.
  • More

See also

  • Feedback for requests, suggestions, and issues.


CRAZY MONSTER CREATE MONSTER Arc Warden With Unlimited Critical Against 722GPM Anti Mage 7.30 Dota 2


This Video Show: CRAZY MONSTER CREATE MONSTER as Arc Warden safelane With Unlimited Critical Against 722GPM Anti Mage 7.30e Dota 2
➥Watch Now: https://youtu.be/9inCjaCaQk8
➤ Welcome to Dota 2 Scepter! It’s all about DotA 2.
► We uploading both Full \u0026 Highlight Dota 2 videos with passion.
➥ Full Gameplay for you to learn pro strategies Such as Laning Phase, Last Hit, Map Awareness, When \u0026 How To Rotate, Item Build, Play Style and Many More.
➥ Highlight Gameplay for most of you who want to watch epic team fight during the game from pro player perspective.
SUBSCRIBE NOW: https://www.youtube.com/c/Dota2Scepters
►Join my Notification Squad: click the 🔔Bell to get updated as soon as a video is uploaded.
►If you find this video to be resourceful, please do like, subscribe and share the video to those who may need them It means a lot to me as a growing content creator.
►Copyright issues, Business:
[email protected]
►Background Music
Ti7 MusicPack: https://dota2.fandom.com/wiki/The_International_2017_Music_Pack
Ti9 MusicPack: https://dota2.fandom.com/wiki/The_International_2019_Music_Pack
Ti10 MusicPack: https://dota2.fandom.com/wiki/The_International_10_Music_Pack
Intro And Outro: https://dota2.fandom.com/wiki/Music
►Check our Top Playlists
➤Intense Battle Gameplay: https://bit.ly/3hPfi8O
➤Megacreep Battle Gameplay: https://bit.ly/3hWeX4m
➤Divine Rapier to Change The Game: https://bit.ly/2WeSvME
➤Best Dota 2 Highlights Gameplay: https://bit.ly/3AJtMja
➤Best Dota 2 Full Gameplay: https://bit.ly/3AWCzNR
➤Top10 Immortal Rank Gameplay: https://bit.ly/3qXxJvZ

►Follow us on Social Media
Facebook: https://www.facebook.com/Dota2scepter
Twitter: https://twitter.com/Dota2Scepter

➥What is Dota 2 ? And Where To Download It ?
Dota 2 is a multiplayer online battle arena video game developed and published by Valve Corporation. The game is a sequel to Defense of the Ancients, which was a communitycreated mod for Blizzard Entertainment’s Warcraft III: Reign of Chaos and its expansion pack, The Frozen Throne.
Initial release date: July 9, 2013
Developer: Valve Corporation
Designer: IceFrog
Genre: Multiplayer online battle arena
Publisher: Valve Corporation
Engine: Source 2
►Download Now: https://store.steampowered.com/app/570/Dota_2/
►valve Dota 2 monetize video policy: https://store.steampowered.com/video_policy

⏰Uploads Schedule⏰ (6Videos Per Day)
➥Full Gameplay
➤9:00AM
➥Highlights Gameplay
➤12:00PM
➤3:00PM
➤6:00PM (INTENSE Battle Gameplay)
➤9:00PM
➤12:00AM
How We Edit My Videos ? 100% Unique And Original Contents
1.Take replay from dotabuff.com or opendota.com
2.Analytics which gameplays are interesting .
3.Record in game client with Nvidia Shadowplay .
4.Edit with adobe premiere pro cc 2018 and thumbnail create with adobe photoshop cc 2018.
We spent more than 15 hours for uploading dota 2 videos.

➤ Every Details about Hero in this Video:
Zet, the Arc Warden, is a ranged agility hero that requires micromanagement and farm to spiral out of control. In the early stages of the game, it is a very powerful nuker. Its first ability, Flux, allows Arc Warden to cripple an enemy down and deal large amounts of damage.

Dota2Scepter ArcWarden UnlimitedCrit

นอกจากการดูบทความนี้แล้ว คุณยังสามารถดูข้อมูลที่เป็นประโยชน์อื่นๆ อีกมากมายที่เราให้ไว้ที่นี่: ดูความรู้เพิ่มเติมที่นี่

CRAZY MONSTER CREATE MONSTER Arc Warden With Unlimited Critical Against 722GPM Anti Mage 7.30 Dota 2

Vlad and his friends are superheroes


Vlad loves cartoons about superheroes, but suddenly superheroes got out of the TV into the room. A funny story about Vlad and his friends superheroes.
Please Subscribe!
VLAD Instagram https://www.instagram.com/Vlad.super.Vlad/
NIKITA Instagram https://www.instagram.com/nikitoys_official/

Vlad and his friends are superheroes

Vlad và Niko La mã là bữa Tiệc Sinh nhật tại công viên Nước,


Vlad và Niki chào mừng Roma là sinh nhật tại công viên nước. Em và cha mẹ đang vui vẻ cùng nhau.
Hãy đăng ký!
Trực tuyến của chúng tôi torg https://vladandniki.com/
Ứng dụng Google Play:
https://play.google.com/store/apps/details?id=me.apptivise.vladnikita
Ứng dụng App Store:
https://apps.apple.com/us/app/vladniki/id1497525407
Instagram VLAD https://www.instagram.com/Vlad.super.Vlad/
Instagram của Nikita https://www.instagram.com/nikitoys_official/

Vlad và Niko   La mã là bữa Tiệc Sinh nhật tại công viên Nước,

OG.ANA MONKEY KING WITH DIFFUSAL-ECHO SABRE – DOTA 2 7.30 GAMEPLAY


Welcome to Kardel Dota 2! Dota Dota2 Gameplay
We upload the best Dota 2 gameplays on youtube. If you’re looking to learn from the best dota 2 players in the world through their perspective, then you’re on the right track.
Here is the playlist you should watch: https://www.youtube.com/playlist?list=PLKJ2kg9FdH3rPQesQ1nep6sEPvkuYEnR
Patch: Dota 2 7.30
https://www.dota2.com/patches/7.30

Player on this video: OG.Ana
Who is Ana? According to https://liquipedia.net/dota2/Ana, Anathan Phan is an Australian professional Dota 2 player. He is the first australian to have won a Valvesponsored event. On August 25, 2019, he becaume the first two time TIwinner, after consecutively winning TI8 \u0026 TI9. He achieved it with Notail, Ceb, Topson \u0026 Jerax. He also popularized Io as a position 1 hero and made an unbeatable record of 60 in \”The International\”.
OG.Ana Dotabuff: https://www.dotabuff.com/players/311360822
Hero on this videos : Monkey King
According to https://dota2.fandom.com/wiki/Monkey_King , Sun Wukong, the Monkey King, is a melee agility hero, best known for his slippery nature and his ability to do Mischief, deceiving his enemies by turning into trees and other objects. Armed with his magic extending staff, the Monkey King slams the ground with Boundless Strikes, and leaps to the treetops to have advantage over his foes with Tree Dance. Perched on a tree, he gains a clear view of his surroundings, allowing him to jump down on unsuspecting targets, dealing heavy damage and slowing their escape with Primal Spring. As a carry, the Monkey King is granted extra damage and lifesteal from Jingu Mastery after landing consecutive attacks on his opponents. In a teamfight, at Wukong’s Command an army of clones is sent out across the battlefield to fight for him, while he himself has his armor increased. Together with the help of his clones and his team, the Monkey King is a force to be reckoned with.
Match ID: https://www.dotabuff.com/matches/6272650387
Learn about https://en.wikipedia.org/wiki/Dota_2:
According to wikipedia.org, \”Dota 2 is a multiplayer online battle arena (MOBA) video game developed and published by Valve. The game is a sequel to Defense of the Ancients (DotA), which was a communitycreated mod for Blizzard Entertainment’s Warcraft III: Reign of Chaos and its expansion pack, The Frozen Throne. Dota 2 is played in matches between two teams of five players, with each team occupying and defending their own separate base on the map. Each of the ten players independently controls a powerful character, known as a \”hero\”, who all have unique abilities and differing styles of play. During a match, players collect experience points and items for their heroes to successfully defeat the opposing team’s heroes in player versus player combat. A team wins by being the first to destroy the other team’s \”Ancient\”, a large structure located within their base.\”

OG.ANA MONKEY KING WITH DIFFUSAL-ECHO SABRE - DOTA 2 7.30 GAMEPLAY

Five Kids Chocolate Surprise Eggs + more Children’s videos


A new compilation video, including one of our most recent songs and videos , \”Chocolate Surprise Eggs\”

Five Kids Chocolate Surprise Eggs + more Children's videos

นอกจากการดูบทความนี้แล้ว คุณยังสามารถดูข้อมูลที่เป็นประโยชน์อื่นๆ อีกมากมายที่เราให้ไว้ที่นี่: ดูบทความเพิ่มเติมในหมวดหมู่Wiki

ขอบคุณมากสำหรับการดูหัวข้อโพสต์ wiki dota

See also  Test Skin \"FAMAS Giả Kim\" Garena Tặng FREE Có Mạnh Không ? Vác Vô Solo Rank Squad | Free Fire | groza free fire

Leave a Comment